Product ID:PAINT HEAT RESISTING
MSDS Date:02/16/2000
FSC:8010
NIIN:01-327-5404
Status Code:A
MSDS Number: CLLCM

STANCHEM INC

401 BERLIN ST
EAST BERLIN, CT 06023-9706
US

Emergency Phone: 800-424-9300

Info Phone: 203-828-0571

Preparer: BOBBY STOKES

Cage: 78520

STANCHEM INC

EAST BERLIN, CT 06023-9706 US

Telephone: 203-828-0571

Cage: 78520

XYLENE

CAS: 1330-20-7

RTECS: ZE2100000

ACGIH TLV: 434 MG/M3;100 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

AROMATIC ALIPHATIC HYDROCARBON SOLVENT BLEND

CAS: 64742-95-6

RTECS: WF3400000

HEAVY AROMATIC SOLVENT NAPHTHA (PETROLEUM)

CAS: 64742-94-5

RTECS: WF3100000

Effects of Overexposure:EFFECTS OF OVEREXPOSURE: INHALATION: MAY CAUSE
RESPIRATORY TRACT IRRITATION AND/OR ANESTHESIA IN HIGH
CONCENTRATIONS. SKIN: MAY CAUSE IRRITATION, DEFATTING UPON
PROLONGED AND REPEATED CONTACT. EYE S: HIGHLY IRRITATING.
INGESTION: MAY RESULT IN VOMITING, ASPIRATION (BREATHING IN) OF
LIQUID INTO LUNGS MUST BE AVOIDED.
Medical Cond Aggravated by Exposure:SINUS AND DERMATITIS

First Aid:INHALATION: MOVE INDIVIDUAL TO FRESH AIR. ADMINISTER OXYGEN
IF BREATHING IS DIFFICULT. SKIN: WASH THOROUGHLY WITH SOAP AND
WATER. REMOVE CONTAMINATED CLOTHING. EYES: IMMEDIATELY FLUSH
EYES WIT H PLENTY OF WATER FOR AT LEAST 15 MINUTES. CONSULT A
PHYSICIAN. INGESTION: DO NOT INDUCE VOMITING. IMMEDIATELY CALL A
PHYSICIAN.

Extinguishing Media:FOAM ALCOHOL FOAM CO2 DRY CHEMICAL WATER FOG
Fire Fighting Procedures:USE SELF CONTAINED BREATHING APPARATUS AND
CLOTHING. FIGHT AS VOLATILE LIQUID FIRE. USE WATER SPRAY OR FOG,
FOAM DRY CHEMICAL OR CO2. CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. U SE WATER TO KEEP EXPOSED CONTAINERS
COOL. USE SUPPLIED AIR BREATHING EQUIPMENT FOR ENCLOSED OR
CONFINED SPACES
Unusual Fire/Explosion Hazard:WATER MAY BE USED TO COOL CONTAINERS TO
PREVENT PRESSURE BUILD-UP AND POSSIBLE AUTOIGNITION AND EXPLOSION
WHEN EXPOSED TO EXTREME HEAT.

Spill Release Procedures:AVOID ALL SOURCES OF IGNITION. AVOID
BREATHING VAPORS. VENTILATE AREA. STOP SPILL AT SOURCE, DIKE AREA
TO PREVENT SPREADING. SPILLED MATERIAL SHOULD BE REMOVED USING
NON-SPARKING TOOLS.

Handling and Storage Precautions:KEEP PRODUCT CONTAINERS COOL, DRY AND
AWAY FROM SOURCES OF IGNITION.
Other Precautions:AVOID CONTACT WITH EYES AND SKIN. AVOID BREATHING
VAPORS AND SPRAY MIST DURING APPLICATION.

Respiratory Protection:APPROVED CHEMICAL/MECHANICAL FILTERS DESIGNED TO
REMOVE A COMBINATION OF ORGANIC VAPORS AND SOLID AIRBORNE
PARTICULATES FROM OVERSPRAY DURING APPLICATION
Ventilation:LOCAL EXHAUSE AS REQUIRED BY JOB CONDITIONS TO KEEP TLV
WITHIN ACCEPTABLE LIMITS.REFER TO OSHA REGULATIONS 29 CFR PART
1910.94.
Protective Gloves:WEAR IMPERVIOUS GLOVES.
Eye Protection:USE SAFETY EYEWEAR WITH SPLASH GUARDS OR SIDE SHIELDS.
Other Protective Equipment:WEAR PROTECTIVE CLOTHING
Work Hygienic Practices:PERSONNEL SHOULD WASH THOROUGHLY AFTER HANDLING
PRODUCT. ALWAYS WASH UP BEFORE EATING, SMOKING OR USING TOILET
FACILITIES
Supplemental Safety and Health

Boiling Pt:>137.C, 278.6F
B.P. Text:279-418 F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:48%

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS, SELECTED AMINES
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:COMBUSTION MAY PRODUCT CARBON MONOXIDE
AND/OR CARBON DIOXIDE.
Conditions to Avoid Polymerization:WILL NOT OCCUR

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE, AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.